About vervoortjurgen

This author has not yet filled in any details.
So far vervoortjurgen has created 99 blog entries.

Cumulatieve update voor op Windows Server 2016 for x64 fails KB4057142

By | 2018-01-31T13:20:21+00:00 januari 31st, 2018|Microsoft, Server 2016|

Some of my windows 2016 server failed to update KB4057142 So here some steps i took to solve it Reboot the server Stop Background Intelligent Transfer Service and Windows Update service. rename the folder C:\Windows\SoftwareDistribution Start the Background Intelligent Transfer Service and Windows Update service Enabled "give me updates for other Microsoft Products" under Windows Updates -> advanced options Search for updates again. let the other products update first. KB4057142 will fail again but the server needs to reboot again. Try updates the next day to finish update KB4057142 One server still failed so i downloaded the KB from Microsoft catalog site here [...]

Windows 2016 slow on ESXi 6.5

By | 2018-01-29T23:18:38+00:00 januari 29th, 2018|VMware|

After some Windows 2016 server deployments on ESXi 6.5 customers started to notice slow server responses. I came across the following VMware article. So after checking the build numbers on the ESXi server it turned out i was on build 5146846. I suggest you upgrade to  ESXi 6.5 Update 1, build number should be 5969303 or higher If you are unable to upgrade ESXi then use the registery settings in this VMware article. hope this helps anyone.

Exchange message tracking

By | 2018-01-17T23:31:50+00:00 januari 17th, 2018|Exchange, Microsoft|

Here some great tools/scripts for message tracking on your exchange server (works for Exchange 2013 and 2016) Exchange 2013/2016 Exchange management shell command: Get-MessageTrackingLog -ResultSize Unlimited -Start "Jan 17 2018” | Out-GridView Microsoft Powershell script: Exchange 2013 Message Tracking Log GUI here (also works on Exchange 2016) Make sure you turn on Message tracking log on your Exchange server ofcourse. open ECP -> servers -> servers. choose your mailbox server and edit.  Under transport log enable "Enable message tracking log"

NSX Edge – Find DHCP lease

By | 2017-12-15T12:10:45+00:00 december 15th, 2017|VMware|

NSX Edge - Find DHCP lease When you switch to NSX edge and you setup DHCP for you network, you find yourself wondering or looking for some IP address of a new device you hooked up. Since there is nog overview in the NSX interface you have to SSH into your NSX edge. So lets SSH with your favorite program into the edge (in my case I use putty) Then type the following: show service dhcp leaseinfo It shows you the ip address and much more of all your DHCP lease devices. For example. i hooked up a new Cisco [...]

Shockwave Flash has crashed vSphere webclient

By | 2017-10-21T20:52:56+00:00 oktober 21st, 2017|VMware|

Well most of you will probably run into this problem by now "Shockwave Flash has crashed" I use mostly chrome but i have been reading that also firefox is affected. Some update of flash makes everything crash. I found a nice fix from virtuallyGhetto so thank you. you saved my day eventually adobe published a new beta release for Flash here here are the steps i took close all browsers uninstall Flash players from your comuter donwload en install the beta Flash player start your browser again and voila.  it works again.

ESXi 6.0 upgrade to ESXi 6.5: The upgrade contains the following set of conflicting VIBs

By | 2017-09-14T12:54:16+00:00 september 14th, 2017|Uncategorized, VMware|

The upgrade contains the following set of conflicting VIBs when i tried to upgrade my ESXi host to 6.5 i ran in the error The upgrade contains the following set of conflicting VIBs: HUAWEI_bootbank_hio_2.0.0.42-1OEM.550.0.0.1331820 HUAWEI_bootbank_hio_2.0.0.42-1OEM.550.0.0.1331820 Remove the conflicting VIBs or use Image Builder to create a custom upgrade ISO image that contains the newer versions of the conflicting VIBs, and try to upgrade again. so lets remove the vib set your ESXi host in maintenance mode because you will need to reboot enable SSH if its not enabled already ofcourse putty into your esxi host list the vib containing HUAWEI: [...]

Failed to connect virtual device ‘ethernet0’

By | 2017-08-15T19:25:43+00:00 augustus 15th, 2017|VMware|

Failed to connect virtual device 'ethernet0' It seems this error is still turning up in vSphere 6.5.  I'm running vSphere I couldn't get the VM connected, so after some searching i came across this blog on the VMware community here. Seems it has something to do with VMRC 9.0. now if you read the post you come to the comment of Czernobog. at the end he had to use the fat client.  Since you cant connect with the fat client to a vSphere 6.5 i had to use the web client HTML5 not the flash. Edit the vm en now i [...]

vCenter Server Appliance 5.x

By | 2017-09-22T19:56:46+00:00 februari 12th, 2014|Vmware|

The vCenter Server Appliance is good for small business to start with. VMware raised the limit from 5 ESX host en 50 VM to 100 ESX host and 3000 VM's and this all with the embedded database. If you use an external oracle database then the limits are the same as the windows version There are still some limitation in the vcenter Server Appliance no sql support for external database no linked vcenter possible no vmware update manager. you still need to install this on separate machine no heartbeat support   To deploy the vCenter Server Appliance 5.x: Launch the [...]