cisco catalyst 2960 limit inboud rate – limit bandwith

By |2016-10-26T12:43:04+01:00September 26th, 2014|cisco|

hello all i'm gonna put a short post here what i did for limiting bandwith on a cisco catalyst 2960-x inbound and outbound rate. why you ask? because maybe your a provider and sold a customer a shared internet line for  3Mbit/s the post is a collection from bits and pieces from different websites Since you need Layer 3 switch for limiting the bandwith on an interface, you still can work arround it if you have QOS and Layer 2 switch outbound: this is simpel to do. for example if you need 3mb outbound trafic conf t speed 10 interface gigaEthernet1/0/3 srr-queue bandwith [...]

cisco USB console driver

By |2014-09-24T23:46:53+01:00September 24th, 2014|cisco|

hello In the past i always used a com port console cable like you all know "the blue cisco console cable" Now that my laptop has no Com port anymore and only one USB port i had to use the Cisco USB console cable. you need a driver for this and looking on the internet i couldn't find it right away so here is the link to the driver so other don't have to look so long Cisco USB console driver at the time of writing this the version was 3.1 good luck to everyone

MSExchange ActiveSync event 1008

By |2016-10-26T12:43:04+01:00September 24th, 2014|Exchange, Microsoft|

Problems connecting a mobile device like ipad, iphone, android or BB OS 10 to exchange 2007, 2010 or 2013 ??? lately im running in this a lot and there is a simple solution. Make sure the user you try to use has "Include inheritable permissions from this object's parent" checked on the Active Directory user's permissions. 1. Open Active Directory Users and Computers 2. Go to "View" and make sure "Advanced Features" is checked, 3. Find the problematic user and open its "Properties" 4. Go to the "Security" tab and click on the "Advanced" button. 5. Verify that the "Include [...]

vcenter 5.5 email alerts for all alarms

By |2016-10-26T12:43:04+01:00September 6th, 2014|Vmware|

vSphere Email alerting In the past i was always modifying every alert with email notification. this takes a lot of time to do. So i went to look on the internet and few smart people out there already wrote this script! so I want to thank these people for there help and knowledge: Lauren Malhoit and Mehdi Kianpour The script that you can download here, is for vSphere 5.5. So keep in mind that you need other script if you are running vSphere 5.0 or 5.1 or vSphere 4.1 Remark: The script ran with errors but kept going in most [...]

Vendor Customized ESX images

By |2016-10-26T12:43:04+01:00September 6th, 2014|Vmware|

When you install ESXi 5.x from vmware you don't have all the plug-ins or modules that a vendor customized ESX images has. Why you ask? well you might want to monitor your ESX host with HP insight manager, IBM System Director or other management software. Or want to update your drivers and firmware with update software of the vendor, with this customized images of the vendor yo don't need to install de additional plug-ins. here are some links to the vendors i use the most ( at the time of writing ESXi 5.5 update 1 was out) IBM VMware vSphere hypervisor (ESXi) [...]